Fang Xin, Chen Xiaoqing, Chen Jiangang, et al. Properties of Abrasion Resistance of Concrete for Debris Flow Mitigation Engineering[J]. Bulletin of Soiland Water Conservation, 2021, 41(4): 113-120.
DOI:
Fang Xin, Chen Xiaoqing, Chen Jiangang, et al. Properties of Abrasion Resistance of Concrete for Debris Flow Mitigation Engineering[J]. Bulletin of Soiland Water Conservation, 2021, 41(4): 113-120. DOI: 10.13961/j.cnki.stbctb.2021.04.016.
Properties of Abrasion Resistance of Concrete for Debris Flow Mitigation Engineering
[Objective] Experiments on strengthening the abrasion resistance of mitigation engineering by mixing nano silica
micro silica powder
polypropylene fiber and other materials with concrete were carried out to discuss the laws of the influence of the mixing material content on the abrasion resistance
in order to provide scientific reference for the mix design of abrasion resistance of concrete in the debris flow mitigation engineering. [Methods] The underwater abrasive test of concrete specimens was carried out by using the underwater steel ball method (SL352-2006) designed by orthogonal experimental design method
and the abrasive resistance strength of concrete mixed with nano silica
micro silica and polypropylene fiber was obtained. [Results] Within the range of selected content
the abrasion resistance strength of concrete specimens increased first and then decreased with the raise of Nano-SiO2
and reached the maximum value when the content was 1.5%. With the increase of microsilica powder
the maximum value was reached when the content was 12%. With the increase of polypropylene fiber
it decreased at first
and then increased
and the maximum value was reached when the content was 1.8 kg/m3. With the increase of air entraining agent
it first decreased and then increased
and reached the maximum value when the dosage was 0.005%. [Conclusion] The most significant factor affecting the abrasion resistance strength of concrete is the content of nano silica
Chen Jiangang, Chen Xiaoqing, Wang Tao, et al. Types and causes of debris flow damage to drainage channels in the Wenchuan Earthquake area[J]. Journal of Mountain Science, 2014, 11(6):1406-1419.
Nazari Ali, Riahi Shadi. Compressive strength and abrasion resistance of concrete containing SiO
2
and Cr
2
O
3
nanoparticles in different curing media[J]. Magazine of Concrete Research, 2012, 64(2):177-188.
陈安生, 唐小萍.纳米SiO
2
对不同强度等级混凝土性能的影响[J].硅酸盐通报, 2013, 32(8):1521-1527.
Cheng An, Lin Weiting. Abrasion resistance of concrete containing polyolefin fibers and silica fumes[J]. Polymers and Polymer Composites, 2014, 22(5):437-442.
Zoran J G, Gordana A T C, Nenad S R, et al. Abrasion resistance of concrete micro-reinforced with polypropylene fibers[J]. Construction and Building Materials, 2012, 27(1):305-312.
Xiao Huigang, Liu Rui, Zhang Fengling, et al. Role of nano-SiO
2
in improving the microstructure and impermeability of concrete with different aggregate gradations[J]. Construction and Building Materials, 2018, 188:537-545.
Wang L, Zhou S H, Shi Y, et al. Effect of silica fume and PVA fiber on the abrasion resistance and volume stability of concrete[J]. Composites Part (B), 2017, 130:28-37.